Reaper EVO 518 cam is a direct bolt in replacement for EVO engines, can be used with stock valve springs, pushrods and lifters. Will respond well with performance exhaust and air cleaner. This cam will also respond well with increased compression and cylinder head work. RPM range 1,650 - 5,500. Grind: 518
Intake: .518 Valve Lift, 4 Open, 42 Close, 226 Duration @ 53", .099 lift @ TDC, .109 Lobe Centerline
Exhaust : .528 Valve Lift, 51 Open, 5 Close, 236 Duration @ 53", .112 lift @ TDC, 113 Lobe Centerline
DISCLAIMER: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VECHICLE
Feuling® does not recommend tuning beyond stock emissions standards.
*QUALIFIED MANUFACTURER DECLARED REPLACEMENT PART ON HARLEY DAVIDSON MODELS WITH 80" ENGINES WITHOUT POLLUTION CONTROLS
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Disclaimer:
“Qualified Manufacturer Declared 49-State Federal Emissions Compliant Part” (Not legal for sale or use in California) means any aftermarket part intended to replace an original equipment emissions-related part and that meets all EPA emission regulations by installing the element of design in all emissions-related respects to the certified configuration of the vehicle, engine, or piece of equipment. This manufacturer has declared in writing that it has fully documented the emissions testing of an appropriate test vehicle, engine, or piece of equipment that had been identically altered and that the part meets all applicable emissions standards for that make/model/year fitment(s) advertised
| Our Dealers / Distributors |
Part # |
| LeMans Corporation |
0925-1037 |
| Neo Factory |
017212 |
| Parts Canada Development Co |
0925-1037 |
| Parts Europe |
0925-1037 |
