• Maintain maximum valve lift!
• Increased stiffness and column rigidity maximizing valve-train stability, increasing engine RPM horsepower and torque output.
• Adjustable pushrods are 3/8” 4130 chrome moly tube and use a minimal adjustment parameter eliminating flex and loss of valve train-stability problems associated with most adjustable pushrods.
• Individual length intake & exhaust pushrods keep the adjustment extension to a minimum
• Designed to exceed the needs of performance engines using larger lift camshafts and high spring pressures, while maintaining proper and critical oil flow to top end valve gear.
• HP+ pushrods have 24 threads per inch adjustment, super strength single jam nut lock system, wall thickness 0.120”
• RACE SERIES® have 24 threads per inch with 0.145” wall thickness - recommended when extreme valve-spring pressures are used.
• Designed for use with hydraulic or solid lifters and street or race engines
• HP+ and RACE SERIES pushrods require removal of rocker covers and rocker arm supports, FEULING QUICK INSTALL rods can be installed without removing the rocker covers, arms and supports
• FEULING® HP+ and RACE SERIES pushrods can be used with the factory pushrod tubes.
• Made in the U.S.A.
NOTE: HP+ and RACE SERIES adjustable pushrods can be adjusted 0.225” over stock length to accommodate longer cylinders and smaller base circle camshafts.
*Rev B 1/28/19
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Disclaimer:
“Qualified Manufacturer Declared Replacement Part” means any aftermarket part intended to replace an original equipment emissions related part and which is functionally identical to the original equipment part in all respects which in any way affect emissions (including durability), or a consolidated part, that has been evaluated and declared by the manufacturer to meet this definition and carry this categorization and designation label. This manufacturer has declared in writing that it has documentation, based upon sound engineering judgment, indicating the replacement part does not reduce the effectiveness of any required emission control device and it does not cause the modified vehicle/engine/equipment to exceed applicable emissions standards for that make/model/year fitment(s) advertised.
| Our Dealers / Distributors |
Part # |
| EAST COAST CUSTOM DISTRIBUTORS PTY. LTD. |
4077 |
| J&P Cycles |
433-980 |
| LeMans Corporation |
0928-0012 |
| Neo Factory |
005915 |
| Parts Canada Development Co |
0928-0012 |
| Parts Europe |
0928-0012 |
| Rollies Speed Shop |
FE-4077 |
| Sundance Enterprises |
4077 |
