FEULING® oxygen sensors are precision made consisting of a ceramic body made of stabilized zirconium dioxide, surface coated with gas-permeable platinum electrodes and a porous ceramic to aid the prevention of erosion due to contamination and particulates in the exhaust gases.
An oxygen sensor or commonly called 02 sensor is a device which determines the oxygen content of the exhaust gas by producing a voltage proportional to the amount of oxygen in the exhaust versus the air.
Oxygen sensors can fail when the sensor’s ceramic element is exposed to certain types of contaminates such as silicone compounds or even an oil-burning engine can easily foul a sensor. Small amounts of contamination in the gasoline or over-the-counter fuel additives, which are not “oxygen sensor safe”, can also kill an oxygen sensor.
Failures can occur instantaneously at the time the contaminant contacts the 02 sensor, causing a dead sensor, or gradually over a period of time. Gradual deterioration results in a slow sensor which does not react as quickly as it should. Slow oxygen sensors can cause a drop in fuel economy of 10-15%, excessive exhaust emissions and poor drivability. Unfortunately, the symptoms of a slow oxygen sensor are not always obvious to the rider unless a major decline in fuel economy is noticed or drivability problems occur.
Life expectancy of an average oxygen sensor in a properly tuned engine is typical 30,000 - 50,000 miles
FEULING® sensors meet or exceed OE specifications, assembled in the U.S.A.
Feuling® does not recommend tuning beyond stock emissions standards.
*QUALIFIED MANUFACTURER DECLARED REPLACEMENT PART
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Disclaimer:
“Qualified Manufacturer Declared Replacement Part” means any aftermarket part intended to replace an original equipment emissions related part and which is functionally identical to the original equipment part in all respects which in any way affect emissions (including durability), or a consolidated part, that has been evaluated and declared by the manufacturer to meet this definition and carry this categorization and designation label. This manufacturer has declared in writing that it has documentation, based upon sound engineering judgment, indicating the replacement part does not reduce the effectiveness of any required emission control device and it does not cause the modified vehicle/engine/equipment to exceed applicable emissions standards for that make/model/year fitment(s) advertised.
| Our Dealers / Distributors |
Part # |
| LeMans Corporation |
1861-0885 |
| Neo Factory |
017228 |
| Parts Canada Development Co |
1861-0885 |
| Parts Europe |
1861-0885 |
| Tucker Rocky - Bikers Choice |
488169 |
