618 F CAM - RACE SERIES CAMSHAFT Requires large bore size, ported cylinder heads, ported intake manifold, high flow valves and large throttle body. Aggressive camshaft requiring high lift and higher load valvesprings see #1207, performance pushrods and lifters. High flow air cleaner and triple stepped exhaust pipe highly recommended. FEULING also recommends matching this cam with our RACE SERIES oiling system #7097 or #7099.
NOTE: High lift/High Load valvesprings required see recommended Feuling HIGH LOAD BEEHIVE valvespring kit #1207 (DRAG# 0926-3138). Heavy duty pushrods #4087 (Drag# 0928-0091). Clearances MUST be checked when installing this cam.
VVT Models: Requires FEULING camshaft sprocket #1095 (HD #25400103), HD timing cup #18400117, Feuling sprocket retention kit #3042 and Feuling camshaft spacers #8041. Must also be able to turn VVT feature off in ECM.
Part # 1352 RPM range 3,100 - 6,650. Grind: 618
...............Valve Lift Open Close Duration @ 50" TDC Lift Lobe Centerline
Intake .608 20 42 242 195 101
Exhaust .618 65 19 264 170 113
Overlap: 39
Lobe Separation: 107
DISCLAIMER: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VECHICLE
Feuling® does not recommend tuning beyond stock emissions standards.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Disclaimer:
This is a RACE ONLY part
Parts designated as “Race Only” are for use only on vehicles used for competition racing and are not for use on vehicles registered for use on public roads. Sale and/or installation of “Race Only” parts in any way inconsistent with this warning is prohibited and may result in enforcement by the U.S EPA under the federal Clean Air Act. “RACE ONLY” PARTS ARE NOT LEGAL FOR SALE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES.
NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY EPA POLLUTION CONTROLLED MOTOR VEHICLE.
| Our Dealers / Distributors |
Part # |
| LeMans Corporation |
0925-1608 |
| Parts Canada Development Co |
0925-1608 |
| Parts Europe |
0925-1608 |
