405 CAM - A workhorse, producing a wide powerband increasing torque and HP throughout the entire RPM range when compared to stock. Direct bolt in replacement for Milwaukee Eight engines, can be used with stock valve springs, pushrods, lifters and exhaust. Will respond well with slip-on mufflers and or complete exhaust system and a high flow air cleaner. Note Feuling recommends using free flowing mufflers with smaller cores for best lower RPM power and pull. RPM range 1,700 - 5,700. Grind: 405
Intake: .395 Valve Lift, 4 Open, 24 Close, 200 Duration @ 50", .068 lift @ TDC, 103 Lobe Centerline
Exhaust: .405 Valve Lift, 36 Open, 11 Close, 205 Duration @ 50", .049 lift @ TDC, 108 Lobe Centerline
Overlap: 7
*Cam specs measured in the engine on the lifter @ 0.050" using a 1.61 rocker arm ratio
EXEMPT FROM EMISSIONS TAMPERING REGULATIONS UNDER CARB EO# D-881-1, 50 State legal CARB compliant: CARB EO# D-881-1
Feuling® does not recommend tuning beyond stock emissions standards.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Disclaimer:
50 State legal CARB compliant: CARB EO# D-881-1
“CARB E.O.” means the specified Executive Order issued by CARB. An Executive Order constitutes an exemption by CARB from CA Vehicle Code 27156 and 38391, for sale of the part number for the make/model/ year fitment(s) specified in the Executive Order.
Disclaimer: Exempt from emissions tampering regulations under CARB EO# D-881-1 for all 2017-2023 M-Eight engine models.
| Our Dealers / Distributors |
Part # |
| LeMans Corporation |
0925-1163 |
| Neo Factory |
021770 |
| Parts Canada Development Co |
0925-1163 |
| Parts Europe |
0925-1163 |
