FEULING® machined steel, stock replacement roller chain drive sprockets fit '17-'26 M8 and '07-'17 Twin Cam® engines as direct replacements. Also used on early '99-'06 engines when converting from spring tensioners to the hydraulic cam chain tensioners using the late style roller chain (FEULING #8061 for example)
FEULING® crank sprockets are designed with a tighter tolerance on the ID for better fit to the pinionshaft which aids in eliminating cam timing variance due to poor crank sprocket fit. Our testing has shown as much as 4 degree timing variance with the loose fit factory sprockets.
Due to the tighter fit, we recommend to complete the camchain alignment using the factory pinion sprocket, then install our #1091 sprocket and double check the alignment. This will save you from having to use a puller on our sprocket multiple times while adjusting the cam chain alignment.
17 tooth crankshaft sprocket (OEM # 25673-06)
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Disclaimer:
“Qualified Manufacturer Declared Replacement Part” means any aftermarket part intended to replace an original equipment emissions related part and which is functionally identical to the original equipment part in all respects which in any way affect emissions (including durability), or a consolidated part, that has been evaluated and declared by the manufacturer to meet this definition and carry this categorization and designation label. This manufacturer has declared in writing that it has documentation, based upon sound engineering judgment, indicating the replacement part does not reduce the effectiveness of any required emission control device and it does not cause the modified vehicle/engine/equipment to exceed applicable emissions standards for that make/model/year fitment(s) advertised.
| Our Dealers / Distributors |
Part # |
| LeMans Corporation |
0925-1058 |
| Neo Factory |
017239 |
| Parts Canada Development Co |
0925-1058 |
| Parts Europe |
0925-1058 |
