ambar ambar

Feuling 18mm Oxygen Sensor 12.5

18mm Oxygen Sensor 12.5 OAL

$69.95
In stock
9900
27719-07

Feuling stock replacement 02 sensor, 2 wire

  • FEULING oxygen sensors are precision made consisting of a ceramic body made of stabilized zirconium dioxide, surface coated with gas-permeable platinum electrodes and a porous ceramic to aid the prevention of erosion due to contamination and particulates in the exhaust gases.

    An oxygen sensor or commonly called 02 sensor is a device which determines the oxygen content of the exhaust gas by producing a voltage proportional to the amount of oxygen in the exhaust versus the air.

    Oxygen sensors can fail when the sensors ceramic element is exposed to certain types of contaminates such as silicone compounds or even an oil-burning engine can easily foul a sensor. Small amounts of contamination in the gasoline or over-the-counter fuel additives, which are not oxygen sensor safe, can also kill an oxygen sensor.

    Failures can occur instantaneously at the time the contaminant contacts the 02 sensor, causing a dead sensor, or gradually over a period of time. Gradual deterioration results in a slow sensor which does not react as quickly as it should. Slow oxygen sensors can cause a drop in fuel economy of 10-15%, excessive exhaust emissions and poor drivability. Unfortunately, the symptoms of a slow oxygen sensor are not always obvious to the rider unless a major decline in fuel economy is noticed or drivability problems occur.

    Life expectancy of an average oxygen sensor in a properly tuned engine is typical 30,000 - 50,000 miles

    FEULING sensors meet or exceed OE specifications, assembled in the U.S.A.

    Feuling does not recommend tuning beyond stock emissions standards.

    *QUALIFIED MANUFACTURER DECLARED REPLACEMENT PART


    FITS:

    2 Wire sensor


    COUNTRY OF ORIGIN:

    USA

    Disclaimer: Qualified Manufacturer Declared Replacement Part means any aftermarket part intended to replace an original equipment emissions related part and which is functionally identical to the original equipment part in all respects which in any way affect emissions (including durability), or a consolidated part, that has been evaluated and declared by the manufacturer to meet this definition and carry this categorization and designation label. This manufacturer has declared in writing that it has documentation, based upon sound engineering judgment, indicating the replacement part does not reduce the effectiveness of any required emission control device and it does not cause the modified vehicle/engine/equipment to exceed applicable emissions standards for that make/model/year fitment(s) advertised.

  • Our Dealers / Distributors Part #
    Drag Specialties 1861-0884
    Neo Factory 017227
    Parts Canada Development Co 1861-0884
    Parts Europe 1861-0884
    Tucker Rocky - Bikers Choice 488168

  • Make Model Year
    Harley-Davidson 1200 Custom EFI XLC 2007 - 2013
    Harley-Davidson 1200 Low EFI XLL 2007 - 2011
    Harley-Davidson 1200 Nightster XLN 2007 - 2012
    Harley-Davidson 1200 Roadster EFI XLR 2007 - 2008
    Harley-Davidson 1200 XLCP 2011 - 2013
    Harley-Davidson 883 Custom EFI XLC 2007 - 2009
    Harley-Davidson 883 EFI XL 2007 - 2009
    Harley-Davidson 883 Low EFI XLL 2007 - 2010
    Harley-Davidson 883 Roadster EFI XLR 2007
    Harley-Davidson 883 Roadster XLR 2007
    Harley-Davidson 883 SuperLow XLL 2011 - 2013
    Harley-Davidson CVO Electra Glide Ultra Classic FLHTCUSE4 2009
    Harley-Davidson CVO Road Glide FLTRSE3 2009
    Harley-Davidson Electra Glide Classic EFI FLHTCI 2007 - 2009
    Harley-Davidson Electra Glide Police FLHTPI 2007 - 2009
    Harley-Davidson Electra Glide Standard EFI FLHTI 2007 - 2009
    Harley-Davidson Electra Glide Ultra Classic EFI FLHTCUI 2007 - 2009
    Harley-Davidson Forty-Eight XLX 2010 - 2013
    Harley-Davidson Iron 883 XLN 2009 - 2013
    Harley-Davidson Road Glide EFI FLTR 2007 - 2009
    Harley-Davidson Road King Classic EFI FLHRC 2007 - 2009
    Harley-Davidson Road King Classic FLHRC 2009
    Harley-Davidson Road King Custom EFI FLHRS 2007
    Harley-Davidson Road King EFI FLHR 2007 - 2009
    Harley-Davidson Screamin Eagle Electra Glide Ultra Classic FLHTCUSE2 2007
    Harley-Davidson Screamin Eagle Electra Glide Ultra Classic FLHTCUSE3 2008
    Harley-Davidson Screamin Eagle Road King FLHRSE3 2007
    Harley-Davidson Screamin Eagle Road King FLHRSE4 2008
    Harley-Davidson Seventy-Two XLV 2012 - 2013
    Harley-Davidson Sportster 1200 X XR 2009 - 2012
    Harley-Davidson Sportster 1200 XL 50 2007
    Harley-Davidson Sportster 1200 XR 2009 - 2012
    Harley-Davidson Street Glide EFI FLHX 2007 - 2009

  • 1 HANDLEBAR PSI GAUGE MOUNT - RAW
    Raw mount fits 1 BARS, GAUGE WITH 1/8 NPT PORT

    $ 119.95

    GEAR CROSS WRENCH LOGO POINTS COVER
    TC 99 - 17, 5 hole, FEULING Gear Cross Wrench Logo -...

    $ 69.95

    GEAR CROSS WRENCH DERBY COVER
    99 - 18 Big Twin (Excluding 15 Ultra/Limited, 18 FLSB,...

    $ 139.95

    FEULING Fuel injector
    FEULING Fuel injector 5.3 g/s

    $ 97.95