HP+ CAMCHEST KIT

W/ REAPER 525 - Chain Drive (OE Spring Tensioners)

$1,595.95
In stock
7201

HP+ CAMCHEST KIT W/ REAPER 525 - Chain Drive, TC 99-06 Exc. 06 Dyna

  • BULLETPROOF CAMCHESTS!

    NOTE: This camchest kit is the original fitment for mechanical spring tensioners, if looking to upgrade to hydraulic tensioners (recommended) see kit #s 7220, 7220P, 7320, 7320P

    FEULING complete camchest kits include all necessary components from top to bottom of the camchest conveniently packaged under 1 part #. These combination kits not only ensure each individual part is designed to work and function together but to do so in total harmony. These camchest kits take the guess work out of the ordering process and guarantees the engine builder maximum reliability, peak performance and the coolest engine and oil temperatures obtainable.

    HP+ SERIES Camchest Kits
    Include: FEULING HP+ high volume Oil pump, High Flow Camplate, REAPER Series Camshafts, HP+ hydraulic roller Lifters, Quick Install adjustable pushrods 0.134 wall thickness, Chrome pushrod tubes, Cam install kit with gaskets/O-rings, Timken/Koyo cam bearings, ARP cam/crank, pump/plate fasteners & washers, moly paste, Loctite, and hardware.

    Camchest kits are available in FEULING HP+ and RACE SERIES combinations and with gear drive or chain drive REAPER camshafts. Fitments available for 99-17 Twin Cam engines.
    25-35 degree cooler engine temperatures, 15-30 degree cooler oil temperatures, 15-30 more pounds of oil pressure, quieter and smoother engine operation, eliminate wet sumping, blow by and oily air cleaners.
    525 CAMS - A real workhorse, designed to increase torque band width and increase fuel economy. Great bolt in camshaft upgrade for stock 88 & 96 engines also performs very well in 103 strokers. Produces strong low and mid range power with a linear horsepower and torque curve. Can be used with factory valve springs, pushrods and lifters. Increases throttle response and eases starting. Will also respond well to increased compression and cylinder head work. RPM 1,750 - 5,500

    Note:
    1999 model engines using key way camshafts/sprocket will need to purchase new spline style rear cam sprocket separately. Please see part #1093 or #1094.

    DISCLAIMER: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES


    FITS:

    TC 99-06 Except 06 Dyna, Chain Drive, Includes 525 Reaper Camshafts #1001, Cam Install kit #2058, HP+ Lifters #4000, Quick Install adjustable pushrods #4096, Chrome pushrod tubes #4095, HP+ Oil Pump #7000, Anodized Camplate #8010 and ARP Camplate/Oil Pump Fasteners #8020


    COUNTRY OF ORIGIN:

    USA


    KIT SKU'S:

    1001, 2058, 4000, 4095, 4096, 7000, 8010, 8020

    Disclaimer: This is a RACE ONLY part Parts designated as Race Only are for use only on vehicles used for competition racing and are not for use on vehicles registered for use on public roads. Sale and/or installation of Race Only parts in any way inconsistent with this warning is prohibited and may result in enforcement by the U.S EPA under the federal Clean Air Act. RACE ONLY PARTS ARE NOT LEGAL FOR SALE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES. NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY EPA POLLUTION CONTROLLED MOTOR VEHICLE.

  • Our Dealers / Distributors Part #
    J&P Cycles 420-468
    Drag Specialties 0925-0533
    Parts Canada Development Co 0925-0533
    Parts Europe 0925-0533
    Rollies Speed Shop FE-7201
    Sundance Enterprises 7201

  • 1 HANDLEBAR PSI GAUGE MOUNT - RAW
    Raw mount fits 1 BARS, GAUGE WITH 1/8 NPT PORT

    $ 119.95

    GEAR CROSS WRENCH LOGO POINTS COVER
    TC 99 - 17, 5 hole, FEULING Gear Cross Wrench Logo -...

    $ 69.95

    American Flag Logo DERBY COVER
    99 - 18 Big Twin (Excluding 15 Ultra/Limited, 18 FLSB,...

    $ 139.95

    FEULING Fuel injector
    FEULING Fuel injector 4.3 g/s

    $ 99.95