ambar ambar

HP+ Performance M8 PUSHRODS, STK Rep

HP+® 0.165 Wall Fits: Milwaukee Eight® 17-24

$169.95
In stock
4087
17900030, 17900031

HP+ 0.165 Wall thickness, one piece Fits: Milwaukee Eight 17-24

  • STOCK REPLACEMENT LENGTH

    Eliminate pushrod flex, reduce valve-train harmonics and increase valve lift

    Fixed Length 4130 Chrome moly one piece pushrods with swedged formed ends. Heavy duty 7/16 diameter tube with 0.165 wall thickness, precision concentricity, heat treated with a black oxide finish. Intake and Exhaust length pushrods are stock replacement lengths and designed to work with the factory base circle camshaft dimensions. These pushrods work with all Feuling, stock and SE Milwaukee Eight camshafts.

    Due to the unstable nature of this 4 valve engine design with 1 rocker arm activating 2 valvesprings Feuling highly recommends running one piece pushrods over quick install adjustable rods to maintain maximum cam/valve lift and reduce valvetrain harmonics and associated hydraulic lifter issues.

    Quick install pushrods are said to be easier to use, however they cannot compare to a solid pushrod for strength and durability

    #4087 HP+ 0.165 Wall - STOCK REPLACEMENT
    FITS STOCK STACK UP HEIGHT AND ALL STOCK, SE, and FEULING cams and standard FULL TRAVEL LIFTERS


    TECH TIP FOR USING 1 PIECE PUSHRODS:
    1.) Remove gas tank, spark plug wires from plugs, left side spark plugs, fuel injector plug ins, compression release plug ins etc.
    2.) Remove voltage regulator bracket bolts qty. 2
    3.) Remove front top engine mount, from frame first then cylinder heads
    4.) Remove exhaust
    5.) Remove oil line, oil cooled models use a small catch tray on top of trans cover, wad of rags in the front to catch oil
    6.) Remove cam cover, rotate engine to timing marks
    7.) Remove top rocker covers, rocker arms, pushrods, pushrod tubes, lifter covers, rocker arms, pushrods, pushrod tubes, lifter covers


    FITS:

    HP+ 0.165 Wall thickness, one piece Fits: M-Eight 17-24, Stock replacement


    COUNTRY OF ORIGIN:

    USA

    Disclaimer: Qualified Manufacturer Declared Replacement Part means any aftermarket part intended to replace an original equipment emissions related part and which is functionally identical to the original equipment part in all respects which in any way affect emissions (including durability), or a consolidated part, that has been evaluated and declared by the manufacturer to meet this definition and carry this categorization and designation label. This manufacturer has declared in writing that it has documentation, based upon sound engineering judgment, indicating the replacement part does not reduce the effectiveness of any required emission control device and it does not cause the modified vehicle/engine/equipment to exceed applicable emissions standards for that make/model/year fitment(s) advertised.

  • Our Dealers / Distributors Part #
    Drag Specialties 0928-0091
    Neo Factory 027137
    Parts Canada Development Co 0928-0091
    Parts Europe 0928-0091

  • RACE SERIES LIFTERS
    HYDRAULIC ROLLER LIFTERS, Standard OD (0.8420-0.8423),...

    $ 299.95

    RACE SERIES  CAMCHEST KIT, OIL COOLED M8
    RACE SERIES CAMCHEST KIT W/ REAPER 465 - Chain Drive,...

    $ 1,895.95

    1 HANDLEBAR PSI GAUGE MOUNT - RAW
    Raw mount fits 1 BARS, GAUGE WITH 1/8 NPT PORT

    $ 119.95